Do you want to avoid gunshot during combat and quickly tackle your enemies? We are just writing the guide on Plate carrier set up to protect you from any bad situation. Newbies don’t know where to place amino, mags and other stuff. You may have now the idea to pick the things within your plate carrier quick.
How to Setup a Plate Carrier?
Plate Carrier Size & Fitting:
The size that you should be concerned with is the armor plate. You will want a plate size that sufficiently covers all of your vital organs and also at the same time, has enough room to hold your armor. Both specific and different armor cut types (such as; shooters and swimmers cuts) can also be accommodated.
The front plate pouch must sit at the width of two fingers under your collarbone. The shoulder straps can be used to adjust the rear plate pouch to make it in line with the front so that it doesn’t sag at the back. You can also remove the side straps and attach it to the front side so that the webbing or attachment systems will not get obstructed. Then you can feed the strap back through its rear plate pouch. You can tighten or loosen the side straps as much as you want for comfortable movement and breathing.
To check if everything is adjusted properly, you can lean your waist back and forward, side to side, bending over and touching your toes. If the plate carrier doesn’t dig into the body, then it means that it has been correctly fitted.
Things You Will Carry
Plate carriers must have armor plates in the main compartments because if not present, the carrier won’t fit properly and will sag when pouches and other items are attached.
Alternatives to using armor plates are; Level IIIA Soft Armor Inserts, belt system or chest rig. After that, you can attach various pouches and things that are essential to the purpose. You must attach these things in a manner that do not interfere with your purpose, ease of use and accessibility, such as; the pouches mounted on the side must never interfere with your access to the holster or other things on the beltline.
What Is Your Purpose?
You, then, need to identify your plate carrier’s use-case. There are many designs like that serve different purposes, such as; The Slick Plate Carrier, Ballistic armor plates, the Condor MOPC.
Front Pouch for Magazines
Having front pouches for magazines is considered an essential rule. The number of magazines to have may depend on usage, whether you want to include pistols or grenades instead etc. A modest amount of magazines would be between 3 and 6. To have more magazines, you can also choose to have a double plated vests, but that might result in prevent ease of use. The Condor Triple Mag Pouch is an example of expanding your mag counts.
Keep Everything Streamlined
You bring the necessary gear as there are limitations to how much your vest can carry stuff. And it’s always best to keep everything simple. For example; whenever you reach for your gear, your gear should be organized in such a way that you don’t have to constantly look down and sacrifice your visibility on your adversaries. You should arrange the items in a way that allows smooth reloads as well as prevents some accidental snags with slings or cables.
Put Some Things Centered
You will need to balance the things and distribute the weight at the center. If you have a strong right side, it would be ideal to balance it with a bleeder stopper set from an IFAK (Individual First Aid Kit) or anything you might have which you may place at the right of your three-magazine shingle but you should not put it very far to the right.
Keep the Shoulders Clean
This is a must and also includes clean weapons as well. Also, you should also put your rifle butt over your shoulders for accurately aimed distance shots. Prevent clutter on buttstock junction and enable yourself to have more comfortable wear through ensuring that your shoulders are clean.
Pistol Reloads on the Beltline
There are many ways to equip pistols. However, an ideal way is to equip the pistol through the belt holster, another is to keep it at their thighs. Those who run the pistol off vest should keep their reloads in the belt line. However, even that depends on how one wants to operate and how one prefers their ease of use.
Those who prefer more reloads may attach those spares on vest’s higher side, using holsters like the Condor HT Holster which mounts via MOLLE. Pistol Reloads can also be kept in the front pocket, where the magazine shingled are kept, and mount the reload on the left face. However, it’s preferred to keep the pistol magazines on the gun belt rather than on the vest.
Make the Pistols Available Easily
Pistols should be put in areas where there is nothing to restrict with your ability to draw it out.
Ideal Place for a Flashlight
One should always keep in mind the med kit. You can attach a tac-light carrier at its right. An alternative would be to mount it far and low left of the plate carrier. Another alternative may be down below the armpit line. You may also use LED light on the pocket light, neck chain or headlamp other than the conventional tac-lights.
This guide should help you in setting up a carrier in a manner that results in comfortable usage and maximum utility.
What Are Plate Carriers?
Plate carriers are a load-bearing system that helps in carrying inserted ‘plates’ which offer varying degrees of ballistic protection. These inserts are attached in the front and back sides of the plate carrier. It is designed in such a way as to protect one’s essential organs, such as; heart, lungs, torso and etc. It protects one from any projectiles, such as; bullets and shrapnel. They are worn on the outside of clothing and use the MOLLE (Modular Lightweight Load-Carrying Equipment) system.
Why Should You Use a Plate Carrier?
The benefit of plate carriers is that they allow you to carry pouches and panels. Hence, one can use them in whatever way that suits them best. Plate carriers are extremely effective and helpful during combat and warfare. It has, for the past 15 years, been the favored option of many military officers and law enforcement. However, Plate Carriers are only effective if set up properly.